Sealife SL980 Anleitung zur Fehlerbehebung PDF herunterladen (Seite 8)

VI. Maintaining a waterproof seal (Before your dive)

1) The light uses two O-rings to maintain a waterproof seal.

2) Every time you open the battery cap make sure the O-rings and

sealing surfaces are clean, undamaged and lubricated.

3) Dampen a clean cotton cloth and wipe it around the o-ring

and o-ring contact surfaces to remove any hair, sand or debris.

4) Carefully inspect the o-ring for cuts, tears or other damage.

Replace o-rings immediately if damaged.

5) Lube O-rings if dry. Apply a small amount of silicone lube on

your finger tip and wipe it around the O-rings. Wipe off excess

lubricant. The o-ring should appear wet.

Important:

Replace O-rings every year if damaged or not. Visit your local SeaLife dealer

or www

.sealife-cameras.com for information on ordering spare o-rings.

1 – O-rings 2 – O-ring contact surface

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 22 23

Keine Kommentare

Sealife SL980 Anleitung zur Fehlerbehebung Seite 8