Sealife Sea Dragon 1200 Light Anleitung zur Fehlerbehebung

10VIII. Care and maintenance (After your dive)1) After each dive, soak the sealed light in fresh water for about15 minutes to remove any residual sal

11IX. Replacing the O-ringsReplace the two O-rings if damaged or at least once per year.1) Use the O-ring Remover toolprovided to lift and remove the

12X. Attaching light to underwater cameraAlign the underwater camera to the light’s mounting screw andhand-tighten. Important: Only attach the light

13XI. Expanding your Flex-Connect™ Lighting SystemGet brighter, more colorful results by expanding your Sea Dragonunderwater camera system. The modu

14Expanding your Flex-Connect™ Lighting System (continued)Select from three universal mounting trays: Dual Tray - Add anotherflash or light with the

15XII. Recommended Camera SettingsFor SeaLife camera with external light accessory (No external flash):1) Set the camera’s scene mode to Sea mode or

16XIII. Great pictures made easyThere are plenty of challenges that photographers face in theunderwater world. Please take some time to review SeaLif

17Limit your shooting distanceWater is 800 times denser than air and quickly absorbs light. TheSea Dragon 1200 and 2000 lights have an effective range

18Control your buoyancy Get your buoyancy undercontrol and set yourself up inthe ideal position before takinga picture or shooting video.This allows y

19Compose a good pictureAvoid shooting down on the subject from above. Shooting downusually results in a poor contrast because the subject blends int

2Contents:I. Safety Warnings...3-4II. Check What You Got ...

20XIV. Advanced SettingsAuto Flash Detect The light includes a flash sensor that will turn off the light for 2 secondsif it detects an external flas

21XV. Troubleshooting GuideLight does not power ON Make sure battery is fully charged and contacts are clean. Replace battery if it has become wet or

22XVI. Specifications Sea Dragon 1200 (item SL983)Light source/ Bulb type: 6 x 3W LED Light (CREE XPG LEDs)Brightness: 1200 lumens Effective Range: 3

23XVII. Parts and Service SeaLife guarantees the original purchaser of this product, for aperiod of one (1) year from the date of purchase, that the

3I. Safety WarningsMake sure you follow these important safety warnings to avoid the riskof fire or injury. Avoid using the light above water for pro

4I. Safety WarningsNever expose battery to fire or intense heat. Do not expose light todirect sunlight for prolonged periods of time.Airlines impose

5II. Check What You GotSpare O-rings (SL98303)O-ring Lube (SL9807)O-ring remover (SL9808)Sea Dragon Case (Small SL941 or Large SL942)Sea Dragon 2000 L

6III. Product view with call-outsMajor parts1 – Light head2 – Metal cooling bezel3 – Release buttons4 – Flex-Connect grip5 – Tray6 – Mounting screw7 –

7IV. Charging and Loading the Battery 1) Charge battery (green light = fully charged)2) Unscrew the battery cap3) Insert fully charged battery. Impor

8V. Operating the light1) Push and hold the powerbutton for 1 second topower ON the light.2) Push the power buttonto change between thefollowing ligh

9VII. Maintaining a waterproof seal (Before your dive)1) The light uses two O-rings to maintain a waterproof seal. 2) Every time you open the battery